A loose phone mount turns navigation into a distraction and a rough road into a genuine risk to your phone. The hard part is finding a holder that fits your handlebar, grips a phone through its case, and controls vibration without making every stop cumbersome.
The best motorcycle phone mount options here range from simple lockable cages to metal systems with vibration dampers, anti-theft screws, mirror bases, and wide angle adjustment. Our top pick is the JOYROOM Dual Dampener 150, while the other nine cover large phones, heavy-duty hardware, quick installation, and lower-profile everyday use.
Comparison table
| # | Product | Award | Phone fit | Handlebar fit | Best for |
|---|---|---|---|---|---|
| 1 | JOYROOM Dual Dampener 150 | Best overall | 4.7 to 7 inches, cases up to 0.71 inches | 18 to 34 mm | High vibration and large phones |
| 2 | BRCOVAN Anti-Theft Dampener | Best anti-theft design | 5.4 to 7.2 inches, cases up to 0.787 inches | 12 to 32 mm | Riders who leave the mount installed |
| 3 | JOYROOM Auto Lock 100 | Best quick-release mount | 4.7 to 7 inches, cases up to 0.71 inches | 0.7 to 1.34 inches | Fast one-handed phone access |
| 4 | JOYROOM Metal Extension | Best extended positioning | 4.7 to 7 inches, cases up to 0.71 inches | 18 to 34 mm | Wide viewing-angle adjustment |
| 5 | Lamicall Dual Dampener 15-40mm | Best wide-bar fit | 4.7 to 6.7 inches, cases up to 0.59 inches | 15 to 40 mm | Mixed handlebar sizes |
| 6 | Lamicall Dual Dampener 20-35mm | Best anti-theft Lamicall | 4.7 to 6.7 inches, cases up to 0.59 inches | 20 to 35 mm | A compact dampened setup |
| 7 | Lamicall Lockable Bike Mount | Best simple mount | 4.7 to 6.8 inches, cases up to 0.59 inches | 15 to 40 mm | Everyday commuting |
| 8 | BRCOVAN Aluminum Alloy Mount | Best metal construction | Adjustable, up to 0.787 inches thick | 12 to 32 mm | Heavy-duty installation |
| 9 | RAM MOUNTS X-Grip Large | Best clamp versatility | 1.75 to 4.5 inches wide, up to 0.875 inches deep | 0.625 to 1.14 inches | Unusual bars and rails |
| 10 | Lamicall All Metal Anti-Shake | Best all-metal fit | 4.7 to 7.2 inches, cases up to 0.67 inches | 20 to 35 mm | Large phones and rigid hardware |
1. JOYROOM Dual Dampener 150: Best Overall
Pros
- Dual dampener system claims to cushion up to 95 percent of vibration
- Press-to-lock operation takes less than one second
- All-metal tie rods and reinforced ball head
- Fits phones from 4.7 to 7 inches
- 360 degree viewing adjustment
Cons
- Some Samsung Ultra phones may not fit
- Requires the safety button to be checked before riding
- The broad clamp may be more hardware than a casual commuter needs
Best for: riders who want the most complete mix of phone protection, fit, and fast operation.
The JOYROOM Dual Dampener 150 is the mount we would keep for a motorcycle that sees rough roads, long rides, and frequent navigation changes. Its strongest feature is not the headline speed rating. It is the combination of a pneumatic shock-absorbing structure, dual dampening, silicone contact points, and a locking mechanism that can be operated with one hand. That gives it a more reassuring feel than a basic four-arm holder.
The fit is unusually generous. It accepts phones from 4.7 to 7 inches and cases up to 0.71 inches thick, with a handlebar range of 18 to 34 mm. That covers many large phones in protective cases, although the listing specifically excludes some Galaxy S24 Ultra and S23 Ultra combinations. The silicone pads sit on the clamp arms and panel, while silicone protection at the outer corners helps keep the phone from sliding or rubbing against the mount.
JOYROOM uses all-metal pull rods and a reinforced core ball head here. Those parts matter because the clamp is only as reliable as the joint and the hardware holding it to the bar. The 360 degree rotating ball lets you switch between portrait and landscape viewing, and the mount is also positioned as camera friendly, with a design intended not to press against the phone camera.
The press-to-lock system is a genuine convenience. Place the phone against the center button, press, and the arms close. Pressing the side arms releases it. The safety button behind the mount still needs to be locked before moving, so this is not a completely thoughtless drop-in system. That small check is the price of getting a secondary lock for rough riding.
Compared with the JOYROOM Auto Lock 100, this model has the stronger dampening story and sturdier all-metal tie rods, while the Auto Lock 100 is lighter and simpler. The JOYROOM Metal Extension offers more flexible positioning, but its extra arm is less compact. Skip the Dual Dampener 150 if your phone is one of the listed oversized Samsung models or if your handlebars fall outside 18 to 34 mm. For most riders who want one mount without obvious compromises, it is the safest choice.
2. BRCOVAN Anti-Theft Dampener: Best Anti-Theft Design
Pros
- Safety screws help deter easy removal
- Includes handlebar and rear-view mirror mounting bases
- 304 stainless steel telescopic rods
- Fits phones up to 7.2 inches and thick cases
- 720 degree rotation and one-handed operation
Cons
- Tightening the safety hardware takes extra effort
- The body uses high-strength composite material rather than an all-metal main shell
- The rear knob adds a step to phone security
Best for: riders who want to leave the mounting hardware on the motorcycle with more resistance to casual theft.
The BRCOVAN Anti-Theft Dampener takes a different approach from the quick-release mounts above it. It treats the mount itself as something worth securing, not just the phone. Safety screws on the double socket arm and mounting base require the included wrench, making it harder for someone to remove the assembly quickly from a parked motorcycle.
Its installation flexibility is a strong point. The package includes a handlebar mounting base and a rear-view mirror mounting base. The handlebar options cover 12, 22, 25.4, 28.6, and 32 mm diameters. That is more specific than simply stating a broad range, and it gives riders with less common bars a better chance of finding a suitable fit.
The adjustable phone body holds devices from 5.4 to 7.2 inches, with a maximum thickness of 0.787 inches including the case. Soft silicone protects the phone from scratches and helps isolate vibration. The design also leaves the camera area non-contact, which is useful for riders who record clips or need an unobstructed rear camera.
Operation is more deliberate than the JOYROOM Dual Dampener 150. You place the phone in the holder, tighten the rear secure knob, and check the locking parts before riding. That is not as quick as a single press, but it gives the BRCOVAN a reassuring mechanical feel. Its 720 degree rotation also allows portrait or landscape positioning, with the double socket arm providing plenty of adjustment.
The trade-off is bulk and setup time. The main body is made from PA66 with 30 percent glass fiber, supported by 304 stainless steel telescopic rods and aluminum alloy mounting bases. It is sturdy without being an all-metal design like the BRCOVAN Aluminum Alloy Mount. Choose this model when theft resistance and mounting-base flexibility matter more than the fastest possible phone removal.
3. JOYROOM Auto Lock 100: Best Quick-Release Mount
Pros
- One-click auto-lock mechanism
- One-handed release
- Supports phones from 4.7 to 7 inches
- Fits 0.7 to 1.34 inch handlebars
- Reinforced ball joint and 360 degree adjustment
Cons
- The vibration protection is less elaborate than the dual-dampener models
- Foldable phones are supported only when folded and without a case
- The phone must be double-checked on rough routes
Best for: commuters who remove their phone often and want the quickest simple locking action.
The JOYROOM Auto Lock 100 is the most straightforward mount in this group to use repeatedly. Its four arms close around the phone when it presses the center button, and both side buttons release it. That design keeps the usual one-handed operation while avoiding the need to manually spread each arm before inserting the phone.
The holder fits 4.7 to 7 inch phones and cases up to 0.71 inches thick. Its handlebar range is 0.7 to 1.34 inches, or roughly 17.8 to 34 mm, which is broad enough for many motorcycles, bicycles, scooters, and ATVs. The fit is less specialized than the Lamicall Lockable Bike Mount, which reaches down to 15 mm, but it accepts a similarly wide range of phones.
JOYROOM adds a high-speed lock switch for a secondary hold and cushions the clamp and phone contact areas with silicone. The listing describes the internal lock as tested beyond 10, 000 presses, while the reinforced ball joint is intended to resist snapping. Those claims do not replace checking the clamp before a ride, but they explain why this holder feels more substantial than a basic spring cage.
The 360 degree ball joint lets you set the phone vertically or horizontally. A silicone pad in the thread helps keep the selected angle from loosening as the motorcycle moves. The claimed 100 mph anti-shake positioning is not a reason to ride faster, but it does make the intended use clear: this is designed for road vibration rather than only smooth bicycle paths.
The JOYROOM Dual Dampener 150 is better suited to riders focused on maximum vibration isolation, and the JOYROOM Metal Extension is more adaptable when the phone needs to sit farther away from the bar. The Auto Lock 100 wins on speed and simplicity. It is the one to choose for daily stops, fuel breaks, and errands, provided your phone case stays within the thickness limit.
4. JOYROOM Metal Extension: Best Extended Positioning
Pros
- Metal extension arm creates more positioning options
- Dual dampening claims to reduce up to 95 percent of vibration
- 720 degree rotating ball head
- Fits 4.7 to 7 inch phones
- Anti-theft clamp design with included hex wrench
Cons
- Extension hardware adds bulk
- Some Galaxy Ultra phones may not fit
- The wider adjustment range requires careful tightening
Best for: riders who need to move the phone clear of gauges, controls, or a crowded handlebar.
The JOYROOM Metal Extension is for a common motorcycle problem: the best place to attach a mount is not always the best place to see the phone. The extension arm moves the holder away from the bar, giving you more room to clear a cluster, mirror stem, or other control. It also makes it easier to set a comfortable viewing position without rotating the whole motorcycle hardware.
JOYROOM combines that arm with a dual vibration-dampening structure and an all-metal rod. The company describes the dampener as reducing up to 95 percent of vibration, while the listing also describes eight anti-shock contact points around the phone holder. The silicone pads protect the phone and help keep the arms from shifting, though no mount should be treated as a substitute for checking the lock before a ride.
The phone range is 4.7 to 7 inches with cases up to 0.71 inches thick. The handlebar clamp fits 18 to 34 mm bars. A 720 degree rotating ball head provides portrait and landscape adjustment, and the safety screws plus included hex wrench add some resistance to casual removal. The mount is also intended to leave the phone camera clear.
Compared with the JOYROOM Dual Dampener 150, this model gives up some compactness for better positioning. The 150 model is the cleaner choice when your handlebar already offers a natural viewing spot. The BRCOVAN Anti-Theft Dampener is more flexible if a rear-view mirror base is important, while the Metal Extension is better when the problem is distance from the bar itself.
The extra arm introduces another joint that must be tightened correctly. It can also make the setup feel more prominent than a basic clamp. Riders with a clear, open handlebar should skip it and choose a simpler mount. For motorcycles with crowded controls or awkward gauge placement, this is the JOYROOM model that solves the most practical installation problem.
5. Lamicall Dual Dampener 15-40mm: Best Wide-Bar Fit
Pros
- Handlebar clamp covers 15 to 40 mm
- Four damping springs support vibration reduction
- One-second phone lock and quick release
- Silicone padding protects the phone and bar
- Fits phones up to 6.7 inches
Cons
- Phone case limit is 0.59 inches
- Some Galaxy Ultra models are excluded
- It lacks the broader phone range of several JOYROOM mounts
Best for: riders whose handlebar diameter is difficult to match with narrower clamps.
The Lamicall Dual Dampener 15-40mm earns its place through fit rather than flashy operation. Its 15 to 40 mm handlebar range is the broadest in this Lamicall group, so it is a sensible option when you are mounting to a nonstandard bar or switching the holder between a motorcycle, bicycle, and scooter.
Its anti-shake system uses four damping springs on a metal board. That arrangement is more meaningful than a generic claim of shock resistance because it gives the vibration a dedicated place to be absorbed before it reaches the phone. Silicone pads cover the clamp corners and handlebar contact area, protecting both surfaces while adding friction.
The phone holder accepts devices from 4.7 to 6.7 inches and cases up to 0.59 inches thick. The maximum stated clamp height is 6.54 inches and width is 3.11 inches. That is enough for many standard and large phones, but it is less forgiving of bulky cases than the JOYROOM Auto Lock 100, which allows up to 0.71 inches.
Installation and removal are quick. Lamicall says the phone can be locked in one second with one hand, and the security lock helps keep the arms closed while riding. It is a practical arrangement for navigation users who take the phone with them after parking. The holder also keeps the phone visible and can be adjusted for the riding position.
The Lamicall Dual Dampener 20-35mm adds a 720 degree metal adjustment arm and anti-theft safety screws, but its bar range is narrower. The 15-40mm version is the better choice when fit is uncertain. Skip it if you use a thick rugged case or a Galaxy S23 Ultra or S24 Ultra, both of which the listing identifies as incompatible.
6. Lamicall Dual Dampener 20-35mm: Best Anti-Theft Lamicall
Pros
- Four-spring vibration dampener
- Metal 720 degree adjustment arm
- Safety screws and included wrench
- Rear security lock for the phone
- Fits 20 to 35 mm handlebars
Cons
- Narrower handlebar fit than the 15-40mm version
- Phone case limit is 0.59 inches
- Galaxy S23 Ultra and S24 Ultra are excluded
Best for: riders who want a compact Lamicall setup with security hardware for the mount and phone.
The Lamicall Dual Dampener 20-35mm is the more security-focused twin to the previous Lamicall model. It uses a four-spring vibration dampener, but adds an adjustment arm with two 1 inch ball heads, safety screws on the base, and a rear security lock. That combination makes it more suitable for a motorcycle that stays parked outdoors or is frequently left with the mounting hardware attached.
The bar clamp is designed for 20 to 35 mm handlebars. Measure before ordering, because it does not reach as small or as large as the 15 to 40 mm version. The two-ball arm supports 720 degree rotation, so you can set portrait or landscape orientation and adjust the phone around nearby controls.
The phone fit is 4.7 to 6.7 inches, with a maximum case thickness of 0.59 inches. Lamicall uses cushioned rubber at the four phone corners and non-slip material at the bar clamp. Those details reduce movement and scratching, but the narrower case allowance matters if you use a heavy-duty protective shell.
Its weakness is that the security features add steps. You need the special wrench for the anti-theft screws, and the rear lock should be engaged before riding. The JOYROOM Auto Lock 100 is faster for repeated phone removal, while the BRCOVAN Anti-Theft Dampener accepts a broader range of phone sizes and offers a mirror mounting base.
Choose this Lamicall when your bar is within range and you want a controlled, secure installation rather than the fastest release. It is a particularly sensible middle ground for riders who want vibration springs and anti-theft hardware without moving to the heavier all-metal products.
7. Lamicall Lockable Bike Mount: Best Simple Mount
Pros
- Simple one-hand installation
- Locking switch on the back
- Fits 15 to 40 mm handlebars
- Supports phones from 4.7 to 6.8 inches
- Lightweight design with silicone protection
Cons
- No dedicated dual vibration dampener
- Phone case limit is 0.59 inches
- Requires the rear lock to be engaged
Best for: commuters who need a straightforward holder for navigation and regular road use.
The Lamicall Lockable Bike Mount is the least complicated recommendation here, and that is exactly why it remains useful. It has a four-corner grip, silicone pads, a rear locking switch, and a clamp that installs without tools. There is no extension arm or spring-based dampener to tune, so the setup stays compact and easy to understand.
The phone fit covers 4.7 to 6.8 inches, including cases up to 0.59 inches thick. Four extra silicone pads let you adjust the handlebar contact for a better fit. The clamp supports bars from 15 to 40 mm, matching the broad range of the Lamicall Dual Dampener 15-40mm.
Portrait and landscape orientation are both supported. The holder can also be used on bicycles, scooters, strollers, and shopping carts, though a motorcycle puts more vibration and force through the mount than those uses. The silicone padding helps with ordinary vibration and prevents scratches, but this is not the right pick if vibration isolation is your main concern.
The rear red switch is important. The phone must be locked by that switch before riding, so the quick one-hand placement is followed by a manual safety step. That is less seamless than the JOYROOM Auto Lock 100, whose arms close around the phone as it presses the center button, but it is still easy to manage once it becomes routine.
This mount is best for a commuter with a normal-size phone and a moderate protective case. Riders with large camera bumps, thick cases, or high-vibration motorcycles should move up to a dual-dampener model. For a simple daily setup, though, the wide bar fit and uncomplicated clamp make it easy to recommend.
8. BRCOVAN Aluminum Alloy Mount: Best Metal Construction
Pros
- 6061-T6 aluminum alloy main body
- Handlebar and rear-view mirror mounting bases
- One-push automatic lock and quick release
- Non-contact camera protection design
- Safety knob and anti-theft hardware
Cons
- Heavier than the composite BRCOVAN
- Mounting hardware is more substantial than needed for casual use
- Phone dimensions are adjustable, but the listing does not give a screen-size range
Best for: riders who prioritize rigid metal construction and multiple mounting options.
The BRCOVAN Aluminum Alloy Mount is the serious hardware option in this roundup. Its main body uses 6061-T6 aluminum alloy, and the handlebar mounting base and double socket arm are also aluminum alloy. That gives the holder a distinctly solid construction compared with composite-bodied alternatives.
The mounting system is flexible. The included handlebar base fits 12, 22, 25.4, 28.6, and 32 mm bars, while the package also includes an aluminum alloy 1 inch ball rear-view mirror base. The double socket arm allows 720 degree rotation, so the phone can be positioned vertically or horizontally even when the mirror location is more useful than the handlebar.
The adjustable holder accepts phones with dimensions from 130 to 185 mm in length and 63 to 90 mm in width, with a maximum thickness of 20 mm. That translates into a broad physical fit, but buyers should compare those measurements with the phone and case rather than relying only on screen size. Silicone cushioning protects the phone, and the non-contact camera design avoids pressing directly against the camera area.
The one-push automatic lock is quicker than the rear-knob process on the lighter BRCOVAN Anti-Theft Dampener. After inserting the phone, a high-speed secure lock can be tightened for extra hold. The safety knob on the double socket arm and included wrench also help deter someone from casually removing the mount.
This is not the lightest design. Its listed weight is about 1.1 pounds, so the added metal is noticeable on a small motorcycle or bicycle. The RAM MOUNTS X-Grip Large is lighter and more adaptable to unusual rails, while the Lamicall All Metal Anti-Shake offers a slimmer phone-focused alternative. Choose the BRCOVAN when the mirror base and metal construction justify the extra hardware.
9. RAM MOUNTS X-Grip Large: Best Clamp Versatility
Pros
- Tough-Claw clamps round, square, and unusual rails
- Spring-loaded X-Grip leaves much of the phone visible
- Optional tether included
- Composite and stainless steel construction
- Lifetime warranty
Cons
- No dedicated vibration dampener
- Exposed grip design offers less wraparound protection
- Clamp range is narrower than the broad bar-fit mounts
Best for: riders with unusual rails or bars who want a proven clamp system rather than a standard circular handlebar base.
The RAM MOUNTS X-Grip Large is different from nearly every other product here. Instead of a silicone-lined four-arm cage, it uses a spring-loaded X-Grip with rubber caps and a Tough-Claw base. That base can attach to round, square, and odd-shaped rails, which makes this the most versatile choice when a conventional motorcycle handlebar clamp is not suitable.
The X-Grip holds phones from 1.75 to 4.5 inches wide and up to 0.875 inches deep. Those measurements are more useful than a vague screen-size promise, especially if you use a thick case or an unusually wide phone. The holder leaves much of the screen and phone body exposed, which makes buttons and the camera easier to access.
The Tough-Claw fits rails and tubes from 0.625 to 1.14 inches in outer diameter. It can also clamp flat surfaces from zero to 1.14 inches. Rubber pads protect the mounting surface, while high-strength composite and stainless steel hardware provide the structural support. An optional device tether is included for extra security during rugged use.
The weakness is its lack of a dedicated vibration-dampening system. The JOYROOM Dual Dampener 150 and both dampened Lamicall models are better designed for reducing motorcycle engine vibration before it reaches the phone. The X-Grip also does not wrap the phone in the same way as a silicone-padded cage, so the tether is worth using when the route is rough.
What it does offer is flexibility, visibility, and a lifetime warranty. Riders with a standard bar and a thick phone case will probably find the BRCOVAN Anti-Theft Dampener or Lamicall All Metal Anti-Shake easier to fit. Pick the RAM system when the mounting surface is unusual or when you already use a compatible Tough-Claw arrangement across different vehicles.
10. Lamicall All Metal Anti-Shake: Best All-Metal Fit
Pros
- Zinc alloy construction
- Patented vibration dampener
- 720 degree metal extension arm
- Fits phones from 4.7 to 7.2 inches
- Camera-friendly, anti-theft design
Cons
- Handlebar range is limited to 20 to 35 mm
- Maximum case thickness is 0.67 inches
- Metal construction adds weight and bulk
Best for: riders who want rigid metal hardware with a generous phone-size range.
The Lamicall All Metal Anti-Shake is built around a zinc alloy body, a metal extension arm, and two 1 inch ball heads. It feels more like permanent motorcycle hardware than a lightweight bicycle accessory. That distinction matters if you want the holder to stay rigid through repeated adjustments and regular exposure to road vibration.
Lamicall pairs the metal structure with a patented vibration dampener and a safety knob. The 720 degree rotation lets you adjust the viewing angle around the handlebar, while the extension arm provides more separation from nearby controls. The design is also intended not to block the phone camera, which helps if you use the phone to record a ride.
Phone compatibility is one of its strengths. The clamp accepts 4.7 to 7.2 inch phones and cases up to 0.67 inches thick. That includes several large Samsung models listed in the product details, including the S24 Ultra and S23 Ultra. The 20 to 35 mm handlebar range is more restrictive than the Lamicall Lockable Bike Mount, so measuring the bar is essential.
The anti-theft design covers both the mounting base and the phone. Special safety screws use the included wrench, while a rear safety lock keeps the phone secured. This is more involved than the quick-release operation of the JOYROOM Auto Lock 100, but it gives the setup a more deliberate, locked-down character.
The BRCOVAN Aluminum Alloy Mount is heavier and offers a rear-view mirror base, while the Lamicall is a cleaner choice when you want a metal extension without that extra mounting option. Skip it if your bar is outside 20 to 35 mm or if you want a mount that disappears when the phone is removed. For large phones and riders who prefer metal hardware, it is a strong final pick.
How to choose best motorcycle phone mount
The right motorcycle phone mount has to match the phone, case, handlebar, and vibration level at the same time. Start with those physical limits, then decide how much security and adjustability your riding actually requires.
Vibration control
Motorcycle vibration can shake the display, loosen a joint, and potentially stress a phone camera. Dedicated dampeners use springs or shock-absorbing structures between the phone holder and the mounting hardware. The JOYROOM Dual Dampener 150, JOYROOM Metal Extension, and Lamicall dual-dampener models are the strongest choices when vibration reduction is the priority.
A simple silicone-lined holder can work for a smooth commuter motorcycle, but it provides less isolation than a spring-based system. Riders who record video or use a phone with a sensitive camera should favor a dedicated dampener rather than relying only on padded arms.
A secure clamp holds the phone in place. A good dampener also reduces what the phone has to endure.
Phone and case dimensions
Do not choose by screen size alone. Measure the phone with its case, including the thickness around the camera and corners. The JOYROOM models accept cases up to 0.71 inches, the BRCOVAN Anti-Theft Dampener reaches 0.787 inches, and the Lamicall models generally have limits from 0.59 to 0.67 inches.
The RAM X-Grip uses width and depth rather than a screen-size range. That makes it useful for unusual phones, but its exposed grip does not provide the same wraparound protection as a padded cage. Large Samsung Ultra phones deserve special attention because several mounts specifically exclude them.
Handlebar diameter
Measure the actual bar where the mount will sit. The Lamicall 15-40mm model covers the widest range in this group, from 15 to 40 mm. The JOYROOM Dual Dampener 150 and Metal Extension cover 18 to 34 mm, while the Lamicall 20-35mm and All Metal Anti-Shake models are suited to a narrower 20 to 35 mm range.
Some mounts include specific inserts for common diameters rather than one continuously adjustable clamp. The BRCOVAN products also include mirror mounting options, which can solve a fit problem if the handlebar is crowded or outside the preferred range.
Locking method
A one-hand lock is convenient at traffic stops, but it still needs a secondary safety check on some models. The JOYROOM Auto Lock 100 closes its four arms when the phone presses the center button. The Lamicall Lockable Bike Mount uses a red rear switch, and several anti-theft models add a rear knob or safety screw.
Think about how often you remove the phone. Commuters who take it into every shop will appreciate quick release. Riders who leave the holder on the motorcycle may prefer safety screws that make the mounting base harder to remove.
Arm and viewing adjustment
A 360 degree or 720 degree ball system gives you portrait and landscape orientation, but the arm design determines how far the phone can move away from the bar. Extension arms help clear gauges and controls, though each extra joint needs to be tightened properly.
The JOYROOM Metal Extension, Lamicall Dual Dampener 20-35mm, and Lamicall All Metal Anti-Shake are the better choices when the phone needs to sit above or beyond the handlebar. A direct clamp is simpler and less bulky when the bar already offers a clear line of sight.
Frequently asked questions
Do motorcycle phone mounts damage phone cameras?
Some mounts are designed to reduce vibration, but no holder can guarantee protection for every phone and motorcycle. Dedicated dampeners, such as those in the JOYROOM and Lamicall dual-dampener models, are preferable for reducing engine vibration. A non-contact camera design can also help prevent the holder from pressing directly against the camera area.
Should a motorcycle phone mount have a safety lock?
A safety lock is useful, especially on rough roads or when the mount uses spring-loaded arms. The lock may secure the phone, the mounting base, or both. Always engage the lock and check the clamp before riding, even when the product advertises automatic locking.
Will these mounts fit a phone with a case?
Several do, but the maximum case thickness varies. The BRCOVAN Anti-Theft Dampener accepts up to 0.787 inches, while the Lamicall Dual Dampener 15-40mm is limited to 0.59 inches. Measure your phone and case together before choosing.
Can these phone mounts be used on a rear-view mirror?
The two BRCOVAN models include rear-view mirror mounting bases. Most of the other products are primarily handlebar mounts, so their fit depends on the diameter and shape of the mirror stem. A mirror location can be useful when the handlebar is crowded, but it must still leave the phone visible without blocking controls.
Is an anti-theft phone mount impossible to remove?
No. Anti-theft screws and safety knobs make casual removal more difficult, but they are not a guarantee against determined theft. The BRCOVAN and Lamicall security-focused models use special screws or a wrench, which is more resistant to quick removal than a standard hand-tightened clamp.
Does a phone mount need an extension arm?
Not always. A direct clamp is smaller and has fewer joints to tighten. An extension arm becomes useful when the phone would otherwise block gauges, interfere with controls, or sit at an uncomfortable viewing angle.
Can I use a motorcycle phone mount on a bicycle or scooter?
Most of these products list bicycles, scooters, ATVs, or similar vehicles as compatible uses. The important checks remain the same: bar diameter, phone dimensions, case thickness, and the level of vibration. A motorcycle mount may be heavier than necessary for a bicycle, but the fit and locking system can still work.
The bottom line
The JOYROOM Dual Dampener 150 is the best motorcycle phone mount for most riders because it combines strong vibration control, a broad phone fit, an all-metal tie-rod structure, and fast one-handed locking. It is not perfect for every oversized Samsung phone, and its safety button still needs a deliberate check, but it handles the widest range of everyday riding needs.
Choose the BRCOVAN Anti-Theft Dampener if leaving the mounting base on the motorcycle is part of your routine, or the JOYROOM Auto Lock 100 if quick phone removal matters more than maximum dampening. Riders with unusual rails should look at the RAM MOUNTS X-Grip Large, while large-phone users who prefer metal hardware should consider the Lamicall All Metal Anti-Shake.
If you are undecided, measure your handlebar and phone case first, then choose the simplest mount that gives you enough vibration control.
As an Amazon Associate we earn from qualifying purchases.